Bont Frames
- Type: Speed
- Wheels: 110mm, 125mm
- Mount: 2pt 195mm
The next generation of carbon fiber frames, using nanotech 'super cell' resin that makes these frames lighter and more impact resistant. Every angle is curved to improve strength and rigidity.
- Type: Speed
- Wheels: 80, 84, 90, 100 or 110mm
- Mount: 2pt 150mm, 165mm, 195mm
Bont 2PF 6061 Frame gets you into Bont's latest technology at an affordable price. Using the same design principles and aesthetics as the 7050 frames, this frame is an excellent choice for inline speed skaters.
- Type: Speed
- Wheels: 100/105mm or 110mm
- Mount: 2pt 195mm
Bont 3PF 7050 Frames mount to any brand boot with 2pt 195mm spacing. 7050 aluminum is heat treated and artificially aged. This tempering greatly increases the hardness of the metal for rigidity and power transfer. Combine with Bont's 3PF Midpoint to act as a 3pt mount setup.
- Type: Speed
- Wheels: 125mm
- Mount: 2pt 195mm
The Bont CXXV Inline Skates Frames are constructed to provide the perfect stiffness through the stride. Offered in two colors, the black uses 6061 grade aluminum while the red is stiffer, using 7050 series aluminum.
The Bont 3PF Midpoint addition makes a 2pt mount boot respond like a 3pt. Outdoors, the 3 point mount delivers more power to the ground. But indoors on a banked track, skaters typically like a little flex to allow the frame to turn better. One option is to have two pairs of skates. 3 point for outdoors and 2 point for indoors. Another solution is to skate with a removable middle mount that you can use when you need it. Thus..the Bont 3PF Midpoint was created.
These small, 1mm thick carbon wedges interlock and can stack on top of each other to be placed between your boots and frames. Placing the wedges in various spots at various heights tilts the frame to correct supination or pronation, to help gain a better edge on your wheels, or to stack in a block to change pitch. Price is for 12 wedges.