CCM Cut Resist A3 Neck & Wrist Guard
Overview
Cut Protection Level
ANSI Rated Cut Level
Certifications
Cut Protection Level
This is the general level of protection against cuts.
-
Minimum
Basic protection suitable for competitive play
-
Standard
Balanced protection for intense game play. Protects against more severe cuts.
-
Maximum
Highest level of cut resistance for elite gameplay, designed for the biggest and fastest players.
ANSI Rated Cut Level
Measures the actual cut resistance of materials based on the ANSI/ISEA 105 standard.
-
N/A
No specific cut-resistance rating provided by the manufacturer.
-
A1
Minimal protection; withstands light cuts (200-499 grams of force).
-
A2
Lower-level protection; resists slightly heavier cuts (500-999 grams of force).
-
A3
Low-level protection; suitable for competitive play (1,000-1,499 grams of force).
-
A4
Standard protection; defends against significant cuts (1,500-2,199 grams of force).
-
A5
Elevated protection for intense play (2,200-2,999 grams of force).
-
A6
Extra protection for faster, higher-impact play (3,000-3,999 grams of force).
-
A7
Ultra-high protection (4,000-4,999 grams of force).
-
A8
Premium protection for all levels of play and ages (5,000-5,999 grams of force).
-
A9
Top-tier cut resistance for ultimate protection (6,000+ grams of force).
Certifications
Indicates compliance with safety standards and regulations for hockey gear.
-
USA Hockey
Approved for play under USA Hockey regulations. Ensures gear meets safety standards for organized play in the United States.
-
BNQ
Certified by the Bureau de Normalisation du Quebec for cut-resistant hockey gear. Required for players in Canadian Minor Hockey leagues to ensure on-ice safety.
-
CE
Meets European safety standards for protective equipment. Designed for compliance with regulations across European leagues and recreational play.
The CCM Cut Resistant A3 Neck and Wrist Guard Shirt is a premium base layer from CCM, offering both neck and wrist cut protection! These two areas are highly vulnerable to receiving lacerations from skate blades and this base layer allows you to seal that gap in coverage and remain much more protected.
They each provide A3 cut-level protection which is perfect for a wide range of skill levels. The neck is both BNQ and CE-certified, allowing it to be worn in any hockey league. It comes with a highly comfortable anti-snag Velcro closure for premium comfort and the protection is even extended down into the chest for bib-style coverage. The wrist guards have 360-degree coverage to ensure any gap between the elbow pad and glove is eliminated.
The base layer is built to handle sweat and combat heat thanks to CCM's AER-TEC TotalDry technology. Strategic mesh paneling and fabric quickly evaporate sweat and expel heat so your body stays cool throughout the game. CCM included a silicone grip on the forearm to offer extra security for your elbow pads, ensuring they stay locked on the arm when you battle for loose pucks or rip that game-winning shot top shelf. Polygiene technology then works to battle odor-causing bacteria, leaving your base layer fresh for the next game.
| OVERVIEW | |
|---|---|
| Model Number | TNG4BA |
| Certified | BNQ, CE |
Specifications
| KEY TECHNOLOGIES | |
|---|---|
| Cut-Resistant Neck Guard and Wrist Protection Strategic cut protection to the neck and wrist areas significantly reduces the risk of direct laceration injuries. Does NOT protect against impacts. | |
| Polygiene Technology Polygiene is a natural product that consists of the main ingredient in sand (Silica). Odor molecules are efficiently captured and permanently eliminated, thus keeping your product fresh, reducing the need to wash, and therefore making it last longer. | |
| AER-TEC TotalDry Built with strategic mesh ventilation and a fabric that delivers premium moisture-wicking properties, players will experience elite-level breathability and comfort underneath their gear. |
| CONSTRUCTION | |
|---|---|
| Material | Body: 90% Polyester / 10% Spandex Neck & Wrist: 43% Aramid Fibers / 41% Polyester / 16% Glass Back Mesh: 88% Polyester / 12% Spandex |
| Design | BNQ & CE Certified Neck Guard ANSI Level 3 Cut Protection - Neck & Wrist Comfortable and Anti-Snag Neck Adjustment Improved Raglan Style Fit Moisture Wicking Fabric Polygiene Technology Flatlock Seams Aer-Tec TotalDry Silicone Grip on the Forearm |
| Graphic | Embroidered CCM Neck Logo |
| Fit | Fitted Arms and Chest, Relaxed Torso |
Videos
Sizing Chart
| GENERAL SHIRT SIZING GUIDELINES | |
|---|---|
| Measure the circumference of your chest roughly 1" below the armpit, and the circumference of your neck using a soft measuring tape, string, or shoelace. Correspond your chest and neck measurements to a shirt size using the table below. |
| JUNIOR - CCM NECK GUARD SHIRT SIZING CHART | ||
|---|---|---|
| Shirt Size | Chest | Neck |
| (Youth) Junior XS | 25" - 26" | 13.5" - 15.5" |
| (Youth) Junior SM | 26" - 27" | 13.5" - 15.5" |
| (Youth) Junior MD | 27" - 29" | 13.5" - 15.5" |
| (Youth) Junior LG | 29" - 31" | 15" - 17" |
| (Youth) Junior XL | 31" - 34" | 15" - 17" |
| SENIOR - CCM NECK GUARD SHIRT SIZING CHART | ||
|---|---|---|
| Shirt Size | Chest | Neck |
| Senior SM | 36" - 38" | 16.5" - 19" |
| Senior MD | 39" - 41" | 16.5" - 19" |
| Senior LG | 42" - 44" | 16.5" - 19" |
| Senior XL | 45" - 48" | 16.5" - 19" |
| Senior XXL | 49" - 52" | 16.5" - 19" |
| HELPFUL ARTICLES | |
|---|---|
| What is BNQ Certification for Hockey Neck Guards? | |
| How to Size a Hockey Neck Guard | |
| How to Select a Hockey Neck Guard | |
| IW Hockey Learning Center |
