Bont Plate Mounting Hardware is a set of screws, nuts, and washers for mounting plates to quad roller skate boots. Recommended for all Bont boot and plate combinations, as other hardware sets may not sit flush inside the boot.
Luigino Plate Mounting Kit contains a complete set of long and short screws, nuts and washers for mounting your plate to your boot.
Long and short mounting bolts for attaching plates to boots. 3/16" diameter with varying lengths for heel and toe. A typical mount requires 4 long bolts and 4-8 short bolts depending on boot size and plate model.
These are the bolts you would need to mount your own plates to your roller skate boots.
Washers designed to fit standard mounting bolts. One pair of skates will typically use 8-12 mounting washers, depending on the size and make of the plate.
Roller skate mounting nuts fitted with locking washers. Sold individually! One pair of skates will typically require 8-12 mounting nuts, depending on the size and make of the plate.
Includes the nuts and bolts you need to affix Roll-Line Plates to your boot of choice. Washers, too!