Overview
The Powerslide Swell Lite 100 Skates are the most 'casual-fit' in the Swell lineup and the only model with removable dual-fit liners. A great model to progress toward more firm, performance-oriented skates. Here, you still get a bit of the best from both worlds.
Myfit Lite Dual-Fit Liners are low-volume removable liners with a monowrap design. The Swell Lite is more affordable than others in the lineup but does not in quality. The boots are anatomically shaped with light and durable glass-fiber reinforced plastic shells. The cuff sets high and is adjustable so that you can get personalized support.
Powerslide's Swell 3x100mm/83A wheels with Wicked ABEC 7 bearings are fast and stable with the same Elite Aluminum cast trinity mount frames use on the others, that keep center of gravity low and help to increase power at push off. Height-adjustable brakes (HABS) allow for prolonged pad life.
Sizing Tip:
Unisex model based on US Men's sizing
| Model Year | 2022 |
|---|---|
| Skate Type | Cross-Training |
| Skill Level | Intermediate and Better |
| Weight | 1400g (US 7.5-8.0 EU 40-41) |
Specifications
| KEY TECHNOLOGIES | |
|---|---|
| Trinity X Mounting The combination of the 'along' mounting block of the boot with the 'across' mounting slot of the frame. This allows for frame adjustment both laterally (7mm) and front to back (8mm) to individual preference and/or to correct ankles from wanting to roll (pronation/supination). Trinity frames mount at three points with two off-set winged mounts under the ball of the foot that creates a channel for the wheels to lower the skate, adding stability and power at push-off. | |
| HABS Height Adjustable Brake System An easy and secure brake that allows for the brake pad to adjust up and down to prolong the life of the rubber. A rear axle that is threaded at both ends allows for installation and removal of the brake with four outer screws that eliminate having to remove the axle or wheel. | |
| 3D Casted Frames Perfectly shaped around the wheels to optimize the space. 3D construction enhances stiffness and power transfer to offer characteristics similar to those found in CNC machined frames. To learn more about the swell models click here! |
| BOOTS | |
|---|---|
| Construction | Glass-Fiber Reinforced Plastic |
| Cuff | Standard |
| Liners | MyFit Lite Dual-Size |
| Heat Moldable | Yes |
| Closures | Cuff Buckle 45 Degree Power Strap Standard Lacing |
| Mounting | Trinity |
| FRAMES | |
|---|---|
| Material | ADC10 Aluminum |
| Mounting | Trinity |
| Length | 9.8" Axle to Axle (250mm) |
| Removable | Yes |
| Adjustable | Yes |
| Stock Wheel Setup | 3x100mm |
| Max Wheel Size | 100mm |
| Axles | One-Piece 8mm |
| COMPONENTS | |
|---|---|
| Wheels | Swell 100mm 83A |
| Bearings | Wicked ABEC7 608 |
| Brake | Included HABS S/M (907031) |
| Axle for Brake Removal | Included |
| Skate Tool | Included |
| MANUFACTURER and WARRANTY INFORMATION | |
|---|---|
| Model Number | 510055 |
| Time | 2 Years |
| Contact | Inline Warehouse |
| Country of Origin | China |
Videos
Sizing Chart
| GENERAL INLINE SKATE SIZING GUIDELINES |
|
|---|---|
| Measure feet with socks on and then reference the model-specific sizing chart. How to Measure Your Feet for Skates How to Try on Skates for Fit How to Choose an Inline Skate |
| PS SWELL LITE INLINE SKATE SIZING CHART Unisex Model Based on US Men's Sizes |
|||
|---|---|---|---|
| SWELL LITE (Men's) |
CM | US Women's | EU |
| 5.0-5.5 | 22.9-23.6 | 6.0-6.5 | 36-37 |
| 6.0-7.0 | 24.2-24.8 | 7.0-8.0 | 38-39 |
| 7.5-8.0 | 25.5-26.1 | 8.5-9.0 | 40-41 |
| 9.0-10.0 | 26.8-27.5 | 10.0-11.0 | 42-43 |
