Overview
The Rollerblade Microblade Skates in Black/Pink are as beautiful as they are fun. They have a push-button to adjust the sizing to 4 different lengths to grow with your child or to be shared among siblings and friends. Skates 4x72mm out of the box with the ability to skate 3x80mm when ready!
Rollerblade Microblade Skates have a supportive fit with plastic cuff and buckles that are easy to use. A Velcro 45-degree strap and standard lacing closure help secure feet comfortably inside. Junior fit liners have a good amount of padding with mesh on the outside that provides a lot of breathability. Below are Lo-Bal composite frames that are easy to balance on as they are low to the ground with a monocoque design (attached to the boot). The frames hold 4x72mm wheels but they have an extra axle hole in the middle of the frame so that your little one can upgrade to a faster 3x80mm wheel configuration when ready. The brake comes attached.
If you are looking for a specific part, check out the Microblade Components List.
| Model Year | 2025 |
|---|---|
| Skate Type | Recreational |
| Skill Level | Beginner |
| Weight | 970g (US 2.0-5.0 EU 33-36.5) |
Specifications
| BOOTS | |
|---|---|
| Construction | Soft Boot |
| Cuff | High |
| Liners | Adjustable |
| Heat Moldable | No |
| Closures | Cuff Buckle 45° Powerstrap Standard Lacing |
| FRAMES | |
|---|---|
| Material | Lo-Bal Composite |
| Mounting | Monocoque |
| Length | 9.5" Axle to Axle |
| Removable | No |
| Adjustable | No |
| Axles | 6mm Two-Piece Axles Microblade 09202600001 |
| COMPONENTS | |
|---|---|
| Wheels | Rollerblade 72mm/80A |
| Max Wheel Size | 80mm |
| Bearings | Rollerblade SG3 |
| Brake | Included Microblade Brake |
| Axle for Brake Removal | Included |
| Skate Tool | Included |
| MANUFACTURER and WARRANTY INFORMATION | |
|---|---|
| Model Number | 86B0751530 NJ02 |
| Time | 1 Year |
| Contact | Inline Warehouse |
| Country of Origin | Vietnam |
Videos
Sizing Chart
| GENERAL SKATE SIZING GUIDELINES |
|
|---|---|
| Measure both feet with socks similar to those in which you intend to skate. Then use the measurement of the longest point and reference the model-specific size chart to determine size. How to Measure Your Feet for Skates. | |
| Proper fit has the toes not being cramped against the front. Toes may slightly brush the front as heels will settle back when in the skating position. Try on skates indoors while in a seated position. Lace and buckle both skates, tap your heels to the floor, and then stand and bend your knees to simulate the skating position. How to Try on Inline Skates for Fit. | |
| Microblade General Sizing: Ordering based on normal shoe size works for most. |
| Size | CM | US |
|---|---|---|
| Y11.0 - 1.0 | 17.1 - 20.5 | 11J - 1 |
| 2.0 - 5.0 | 21.0 - 23.0 | 2 - 5 |
| 5.0 - 8.0 | 23.0 - 26.0 | 5 - 8 |
