The Bont Toe Stop Set Screws come as a 2-pack and are an easy fix if you find yourself misplacing your toe stop bolts.
A pair of replacement 5mm toe stop locking screws. As the renowned philosopher Forrest Gump once said: "And that's all I have to say about that."
Replacement nut for the lost or stripped out nut on your toe stop. Designed as a replacement for the Falcon Eagle and Viper plates but cross compatible with other plates that require a toe stop lock nut.
The Luigino Pilot Toe Stop Set Screw is the stock replacement set screw for toe stop housings in the Pilot plate line. The 5mm hex head makes it compatible with most toe stop hex tools, making it easy to keep your toe stops in place!
The RD Elite Toe Stop Set Screw is the perfect replacement if you find yourself missing one. They are perfectly compatible with Roller Derby Elite Plates.
Replacement 5/16" bolt for securing bolt-on toe stops. Intended for use with PowerDyne bolt-on plates or with standard adjustable housings when paired with the 5/16" Bolt-On Toe Stop Insert.
If your roller skates were set up for the adjustable toe stops, and now you want to put on the Bolt On toe stop, you will have to remove the front mounting bolts from the skates, pop out the insert from the underside of the plate and install the 5/16" insert and re-mount the front of the skate. These are the inserts and will work on Riedell Nylon Plate skates only. Sold individually.
A replacement standard toe stop housing for PowerDyne nylon plates. The plate will have to be unmounted for installation but your threads will be as good as new!
A 5/8" washer with locking teeth for use between lock nut and plate when securing toe stops. Recommended on PowerDyne's Thrust and Triton Plates and compatible with any 5/8" stem toe stop. Price is for one washer.
A 5/8" nut for use in securing toe stops to plates that lack a set screw. Recommended on PowerDyne's Thrust and Triton Plates and compatible with any 5/8" stem toe stop. Price is for one nut.
A replacement toe stop locking screw for plates using 5mm toe stop screws, not compatible with Sure Grip plates.
A 5/8" washer for use between lock nut and plate when securing toe stops. Recommended on PowerDyne's Thrust and Triton Plates and compatible with any 5/8" stem toe stop. Price is for one washer.
A set of two replacement set screws used to secure toe stops in Roll-Line Plates.
Replacement toe stop housing for Sure-Grip Probe Plates. When threads end up stripped or damaged you can remove the plate, replace the housing, and keep on keepin' on!
Replacement toe stop set screw for Sure-Grip brand plates. Requires a 3/16" hex wrench.